Replacing Felt Strips:
https://www.youtube.com/watch?v=eWF59jkzjW4
https://www.youtube.com/watch?v=irB0_u82Lbs&index=3&list=PLqHrwjTmB8fRndAyAdOTyb_VcG3fAnAEm
Probe Fail, Clean Nozzle error:
https://www.matterhackers.com/articles/how-to-troubleshoot-a-taz-6-leveling-error
Tightening the belt
For X-Axis belt, see step 15:
https://ohai.lulzbot.com/project/replacing-lulzbot-taz-x-axis-motor/maintenance-repairs/
For Y-Axis belt, see step 16:
https://ohai.lulzbot.com/project/replacing-lulzbot-mini-y-axis-motor/maintenance-repairs/
Blow out control box:
For opening the Mini control box see step 4:
https://ohai.lulzbot.com/project/rambo-identification-installation-lulzbot-mini/
For opening the Taz 6 control box see step 3:
Cura Guide (outdated but still useful):
https://devel.lulzbot.com/mini/software/cura/documentation/Manual.pdf
Fixing thin prints in Meshmixer:
https://www.shapeways.com/blog/archives/37201-tutorial-tuesday-50-targeted-thickening-meshmixer.html
Non-manifold geometry explanation:
https://www.sculpteo.com/blog/2017/10/18/how-to-fix-non-manifold-geometry/
See #4 for additional non-manifold explanation:
See Problem 1 for repairing surface holes in Meshmixer and Problem 4 for reducing file size in Meshmixer:
https://pinshape.com/blog/how-to-repair-your-stl-files/
Another tutorial for fixing holes in Meshmixer:
https://blog.prusaprinters.org/repair-3d-models-errors/
Additional info about .stl file issues:
https://www.3dhubs.com/knowledge-base/fixing-most-common-stl-file-errors
Reversed normals explanation:
https://www.lulzbot.com/learn/tutorials/tips-and-tricks-repairing-your-problematic-stl-file
Fix a reversed normal in Fusion 360:
http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-5AB485F7-A843-4395-B130-3798E5BB37D6
Fix a reversed normal in Meshmixer:
Level X-axis:
https://ohai.lulzbot.com/project/leveling-x-axis/maintenance-repairs/
Troubleshooting PEI issues:
https://www.lulzbot.com/learn/tutorials/pei-print-surface-troubleshooting
Z-offset tutorial:
https://www.lulzbot.com/learn/tutorials/Z-axis-offset
Another Z-offset tutorial:
https://ohai.lulzbot.com/project/z-axis-offset-adjustment-LulzBot-Mini/
Not extruding at start of print:
https://www.simplify3d.com/support/print-quality-troubleshooting/#not-extruding-at-start-of-print
Clearing a clog in the hot end:
https://www.lulzbot.com/clearing-your-hot-end
Warping explanation:
https://www.simplify3d.com/support/print-quality-troubleshooting/#warping
Maximizing bed adhesion:
https://www.lulzbot.com/learn/tutorials/tips-and-tricks-maximizing-bed-adhesion-cura-le
Prevent and fix filament tangles:
https://www.matterhackers.com/articles/how-to-prevent-and-fix-filament-tangles
Guides for print quality troubleshooting:
https://www.simplify3d.com/support/print-quality-troubleshooting/
https://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide
Disclaimer: This website includes links to non-PPLD websites and services. PPLD cannot control the content or functionality of non-PPLD websites or services nor endorse the accessibility or accuracy of those sites. Users should use critical judgment in relying on information found in these resources and determine what information is appropriate to their needs.
This website also links to documents that may not be fully accessible, documents can be made accessible by request. Please visit our Accessibility page for more information.