Library 21c:
(719) 531-6333 x1549
Library21cMake@ppld.org
East Library:
(719) 531-6333 x1372
EastMake@ppld.org
Sand Creek Library:
(719) 531-6333 x7018
SandCreekMake@ppld.org
Manitou Springs Library:
(719) 531-6333 x7004
1. Download PrusaSlicer for free here.
2. Follow instructions to load and set up your file.
3. Upload your file and adjust as necessary.
4. Make sure you select either PLA or PETG from the material section.
