Library 21c:
(719) 531-6333 x1549
Library21cMake@ppld.org
East Library:
(719) 531-6333 x1372
EastMake@ppld.org
Sand Creek Library:
(719) 531-6333 x7018
SandCreekMake@ppld.org
Manitou Springs Library:
(719) 531-6333 x7004
1. Download Cura Lulzbot edition for free here: https://www.lulzbot.com/cura
2. When you get to the Add a Printer step when launching Cura for the first time, add either a Mini 2 or a TAZ Workhorse (select SE 0.5mm nozzle for both) .
3. Upload your file and adjust as necessary (make yourself a note of adjustments to include in the specific instructions section of the dropoff submission form).
4. Make sure you select either PLA or ABS from the material section. Typically, we use the PLA (Verbatim) and ABS (IC3D) filaments.
Cura 3.6 (newest version)
